GeoVISION™ Econo Light Duty basic unit packing list

Return to Econo Light Duty system main page

                                                                        GeoVISION Home

1. One Econo Light Duty B/W or  Color Camera in housing, with Camera support, support clamp & tilt-head attachment (mounted on camera when shipped).

2  Cable storage reel (plastic) with slip-rings inside with 325’ of 3 conductor power/signal cable

3  System power supply and control panel

Centralizer attachment (CPVC pipe with adapters, 4 nylon straps & 2 stainless steel hose clamps).

5  Various parts kit (1 quart bag) containing:

i           One 3/32” hex ball end screwdriver.

ii         One #0 Phillips screwdriver.

iii        Spare parts kit (2 x 3” bag) containing:

a         One #8-32 stainless steel nut.

b        Three #8-32 x 3/16" button head stainless steel cap screws.

c         One #8-32 x 1/4" button head stainless steel cap screw.

d        One #8-32 x 3/8" button head stainless steel cap screw.

e         One #8-32 x 5/8" button head stainless steel cap screw.

f          Two #4-40 x 3/16" pan head Phillips stainless steel screws.

g         One #4-40 x 1/2" pan head Phillips stainless steel screw.

h         One #4 stainless steel flat washer.

i           One 1 Amp Fast Acting 5 x 20mm Fuse.

iv       Tool kit(2 x 3” bag) containing:

a         One 3/32” short arm hex key.

b        One 11/32" aluminum open end wrench.

Video operation / instruction tape (VHS) or DVD.  View this for operating information.

AC power adapter (115 Vac 60 Hz to 12 Vdc).

Cigarette jack cord.

This owner’s manual.