B/W Jr. SYSTEM

The high-resolution, low light, Econo Heavy Duty systems, shown above, are designed to view boreholes and water wells 2 inches (51 mm) to 12 inches (610 mm) in diameter. Larger voids may be viewed using the motorized pan-tilt attachment, optional or owner-supplied auxiliary lights, or the ultra low light camera. Maximum depth is 1000 feet (300 meters). You can use your own VCR, VCR/TV combination, Camcorder with external A/V recording capability, or analog to digital conversion device to make video logs.

Econo Heavy Duty GeoVISION^TM Components Table

All Econo Heavy Duty Systems have the following features:

The operating temperature 32°F [0 ° C] to 100° F [37° C]

The hand-operated Heavy Duty Steel Winch is equipped with a one-way brake, slip rings, ball bearings, and a reel-locking knob.

Choose a cable length of 325, 650, or 1000 feet (100, 200, 300 meters) marked in one foot increments.

Three-conductor polyethylene jacketed 160 lb. test cable and a waterproof connector on the camera end.

Heavy Duty Universal Power Supply (120-240 vac 50 - 60 Hz). Includes input power cord, 12 Volts DC input power jack, microphone-in jack, to winch power/signal modular jack, audio amp with speaker, OSD circuitry and audio/video input/output jack. Includes a 15 ft. modular cable from the power supply to winch.

The centralizer is attached above the camera. The cable safety support, owners manual, instruction video, tools and other small items are standard with each system.

Cameras

Six GeoVISION interchangeable cameras are available with the Econo Heavy Duty system.

See the camera table for details.

Selected Option Descriptions

Cable is available in lengths of 325, 650, or 1000 feet. – Three-conductor polyethylene jacketed 200 pound test cable and a waterproof connector on the camera end.

5 inch CTR B/W Monitor with 3-way power (10 'D' size internal batteries, 12 Volts DC or AC adapter) – Includes Sun shade

5.6 Inch flat screen Liquid Crystal Display (LCD) Color Monitor – Includes Sun shade - LCD Monitor or VCR Mounting Head on Winch

LCD Monitor or VCR Mounting Head on Winch

Hat Mounted Monitor – Black and White

This optional On Screen Camera Depth Display (OSD) is for use with the Jr. systems. It will place the camera’s depth in feet or meters in any one of five locations on the video screen and will appear on the recorded video. The numeric display can be located in the center of the screen, in any one of the four corners, or not shown by pushing a button to cycle through these alternative locations. It is supplied with the footage counter encoder/wheel/clamp assembly. The OSD controls are incorporated in the control panel of the power supply control box. It has a count reset button on it and if you press the reset button for longer than 5 seconds the display will start counting up from zero until released. All necessary cables and instructions are included.

Side-Looking Mirror for use in 2 inch to 3 foot boreholes

Auxiliary Dive Light (for large bores and voids)

Cable protector mounts on the casing and provides a smooth surface for the cable to slide over and drop down into the center of the borehole.

Inverter 300 Watt - 12V to 115VAC 60Hz

Deluxe Carrying Case - Includes Accessory case

Carrying Case - 26 inch lockable – Includes Accessory case

Select options and configure a Econo Heavy Duty GeoVISION™ system

Depending upon options the system weighs between 25 and 50 pounds

The GeoVISION™ Econo Heavy Duty system has a one year Limited Warranty on parts and labor.

These specifications are subject to change without notification.

For product information, sales, brochures, demonstration DVD, and prices you may:

Call 800-255-1353 toll free from the US and Canada, elsewhere 804-741-4274

Fax 1-866-871-9646 or

Email: john@geovision.org or wilsonjml@msn.com

GeoVISION Home