GeoVISION ^TM Econo Heavy Duty – shipping list GeoVISION Home

Back to main Econo Heavy Duty system page

1 One GeoVISION camera in housing, with camera support, support clamp & tilt-head attachment witch is mounted on camera when shipped.

2 HD cable winch with either 325 feet, 650 feet, or 1000 feet of 3 conductor power/signal cable.

3 HD power supply and control panel

4 Centralizer attachment (CPVC pipe with adapters, 4 nylon straps & 2 stainless steel hose clamps).

5 Various parts kit (1 quart bag) containing:

i One 3/32” hex ball end screwdriver.

ii One #0 Phillips screwdriver.

iii Spare parts kit bag containing:

a One #8-32 stainless steel nut.

b Three #8-32 x 3/16" button head stainless steel cap screws.

c One #8-32 x 1/4" button head stainless steel cap screw.

d One #8-32 x 3/8" button head stainless steel cap screw.

e One #8-32 x 5/8" button head stainless steel cap screw.

f Two #4-40 x 3/16" pan head Phillips stainless steel screws.

g One #4-40 x 1/2" pan head Phillips stainless steel screw.

h One #4 stainless steel flat washer.

i One 2 Amp Slow Blow 5 x 20mm Fuse.

iv Tool kit bag containing:

a One 3/32” short arm hex key.

b One 11/32" aluminum open end wrench.

6 Video operation / instruction tape (VHS) or DVD. View this for operating information.

7 3/16” x 6” ‘T’ handle hex key

8. Owner’s manual.

Some Options, depending on which items you ordered, may be packed in a separate box:

Cable protector, On-Screen-Depth camera display, 5” B/W Monitor, 5.6” LCD Color Monitor, Digital Walkman, Side-Looking Mirror, Compass, Dual-Dive light, Carrying Case, Deluxe Carrying Case, 300 watt Inverter, microphone, andTripod for Monitor.